To connect the keypad to Windows 10, please follow the steps below:
1. Open your Control Panel
2. Open Devices and Printers
3. Place the device into pairing mode (the LED will flash)
4. Select Add a Device (in the top left corner)
5. Select the device from the list
6. Click the words "Or try entering a passcode on it" underneath the box asking for the passcode
7. Input the passcode into the device and press enter on the device when done
Please see attached Instructional Guide for further information. If you have any other questions, please contact us at support@satechi.com
Comments
1 comment
Afer paired on Windows 10, the keypad types letters, not numbers. It appears the numlock key should be pressed but I don't have a numlock key on my laptop. What to do.
Please sign in to leave a comment.