To connect the keypad to Windows 10, please follow the steps below:
1. Open your Control Panel
2. Open Devices and Printers
3. Place the device into pairing mode (the LED will flash)
4. Select Add a Device (in the top left corner)
5. Select the device from the list
6. Click the words "Or try entering a passcode on it" underneath the box asking for the passcode
7. Input the passcode onto the device itself and press enter on the device when done
Please see attached Bluetooth Pairing Guide for further clarification. If you have any other questions, please feel free to contact us!
Comments
0 comments
Article is closed for comments.