SSD Installation Guide (NVMe or M.2 SATA Drives) 

1. Remove the SSD enclosures' Aluminum casing 

1. Remove the Silicon Strip and Rubber Stopper (in the small black box with the user manual included) 

2. Place the Silicon Strip under your SSD drive

3. Place the Rubber Stopper on the end of the SSD drive and ensure that the drive is inserted at an angle (make sure the SSD is inserted then press down on the rubber stopper to secure the drive) 

4. Place the metal casing back on the dock 

5. Plug the dock into your iMac's Thunderbolt 3 Port - now the dock and SSD drive will be ready to use.

*Step by step instructions will be included in the user manual as well as at the bottom of the dock