Connect the power adapter from the Hub’s DC port directly to a wall outlet.
When connected to power, the LED will light up orange until the host device is connected.
Connect up to three USB-C devices to the hub’s Thunderbolt 4 ports.
Supports up to 40Gbps, 15W charging, dual 4K video output up to 60Hz total or single 8K video output at 30Hz.
macOS doesn’t support 8K video output.
Using the included Thunderbolt 4 cable, connect the hub to your host device from its Thunderbolt 4 host port located at the front of the hub.
Once the host device is connected, the LED color will change to green.
Features 96W max pass-through charging to the host device.
USB 3.2 Gen 2 port allows for transfer data at up to 10Gbps speed.
Does not support charging or Apple SuperDrive.
Allows for daisy-chaining up to 6 devices a. Can connect USB-C to HDMI adapter / cable for HDMI support b. Can connect USB-C to DisplayPort adapter / cable for DisplayPort support c. Can connect to other adapters and hubs for more port connectivity Disclaimer: macOS 11 or higher required when using with Macs
Comments
0 comments
Article is closed for comments.