View Product Page

This Quick Start Guide covers getting started with the Satechi 108W Pro USB-C PD Desktop Charger (ST-TC108WM).

How to set up the Satechi 108W Pro USB-C PD Desktop Charger

The charger is plug and play. Charging cables are sold separately.

1. Connect the power cord to the back side of the charger and plug it into a wall outlet.

   

2. Connect your devices. The charger supports charging up to four devices simultaneously, with a total max output of 108W. The light-emitting diode (LED) light indicates when the charger is in use.

   

3. Connect a USB-C (Universal Serial Bus Type-C) laptop or tablet to the first USB-C Power Delivery (PD) port, the USB-C Charging Port (90W Max.).

   

4. Connect a USB-C smartphone or tablet to the second USB-C PD port, the USB-C Charging Port (18W Max.).

   

5. Connect up to two Universal Serial Bus (USB) devices to the USB-A (Universal Serial Bus Type-A) ports, with a combined max output of 12W.

   

108W Pro USB-C PD Desktop Charger ports and controls

• 2-Pin Power Connector
• Power Cable (included)
• LED Indicator: indicates when the charger is in use.
• USB-C Charging Port (90W Max.): PD 5V/9V/12V/15V at 3A, 20V at 4.5A. Quick Charge 3.0 (QC3.0) 3.6V-6V at 3A, 6V-9V at 2A, 9V-12V at 1.5A.
• USB-C Charging Port (18W Max.)
• 2x USB-A Charging Ports (Total 12W Max.)

Important notes for the 108W Pro USB-C PD Desktop Charger

• For the fastest and safest charge, please use the original device cable or a certified one.
• Fast charge USB-C PD devices using an Apple Made for iPhone (MFi) Certified USB-C to Lightning cable. Cable not included.

  

• Keep away from water, liquid, and moisture.