View Product Page

This Quick Start Guide covers setup of the Satechi Aluminum 4-Port USB 3.0 Hub V2: an aluminum 4-port USB 3.0 hub.

Setup steps

Step 1: Plug the included USB cable into the port on the left side of the Hub and connect it to USB 3.0 port of your computer or laptop.

Step 2: Connect up to 4 USB devices like external hard drives, cameras, flash drives, keyboards.

Forward and backward compatibility between USB 3.0 and 2.0 / 1.1 hosts and devices.

Step 3: The hub is not a standalone charger and will not charge phones or tablets.

Not recommended for use with USB 3.0 PCI-e add-on cards and Apple Super Drive.