View Product Page

This Quick Start Guide covers setup of the Satechi USB-C to USB-C Gen 2 Flat Cable: supports 4K/60Hz video, data transfer up to 20Gbps, and charging up to 240W.

Setup steps

Step 1: Connect the USB-C to USB-C Data & Charge Cable to a USB-C or Thunderbolt external monitor. Supports a single display at up to 4K @ 60Hz resolution. The USB-C port must support DisplayPort over Alt Mode to enable video output.

Step 2: Connect the Cable to the USB-C port on your compatible host device for fast data transfer speeds up to 20Gbps maximum. Compatible with Thunderbolt 4, Thunderbolt 3, USB4, USB 3.2, USB 3.1, USB 3.0, USB 2.0 Type-C ports.

Step 3: Charge your host devices up to 240W. Not all host devices support 240W charging. Refer to your device's technical specifications.