- To install the SSD, slide off the backside cover on the adapter.
- side of the pins.
-
Insert the SSD (not included) faceup with the pins aligned and push down on the screw to secure it into place.
- Supports SATA M.2 SSD only, does not work with Nvme Connect the adapter to an USB-C port on your host device.
- Once the SSD is secured, slide the cover back onto the adapter.
-
Use the USB-C PD port to charge your device up to 100W.
- ~15W is used for the adapter’s operation
-
Use the HDMI port to output 4K HDMI to an external monitor or display – up to 60Hz.
- Requires a direct HDMI-HDMI connection
- Use the USB-A data ports to connect two USB devices – up to 10 Gbps. Does not support charging or CD readers, including Apple SuperDrive
Remove the screw and position it in the notch on the opposite
Comments
0 comments
Article is closed for comments.