View Product Page

This Quick Start Guide covers getting started with the Satechi OntheGo™ Power Bank (10K) (ST-B10Q2SK ST-B10Q2SW ST-B10Q2SR).

How to set up the Satechi OntheGo™ Power Bank (10K)

1. To charge your device, attach the power bank and press the power button.

   

   

2. Press the power button twice to turn off.

   

How to recharge the OntheGo™ Power Bank (10K)

1. Use the included USB-C (Universal Serial Bus Type-C) cable and connect to your power bank.

   

2. Connect the other end to a USB-C charging port.

OntheGo™ Power Bank (10K) ports and controls

• Qi2 Wireless Charger (15W Max)
• Power Button
• Adjustable Hinge (up to 120°)

  

• USB-C Port (Input/Output 20W Max.)

  

• light-emitting diode (LED) Indicator

OntheGo™ Power Bank (10K) LED indicator meanings

• Press the power button to turn on. The LED Indicator Lights will indicate the battery level of the power bank: 0-25%, 25-50%, 50-75% or 75-100%.
• The LED Indicator Light will blink white when the power bank is being charged.
• The LED Indicator Light will turn blue when a device is being charged.
• The LED Indicator light will blink blue if an unexpected object is detected on the Qi2 Magnetic Power Bank.

Important notes for the OntheGo™ Power Bank (10K)

• Power Bank will automatically turn off after 30 seconds when no device is detected.
• Minimum 20W input power recommended for optimal charging.
• The power bank supports pass-through charging that allows you to charge your device and recharge your power bank at the same time.
• Only Qi2 & MagSafe compliant devices will reach 15W via the Qi2 Magnetic Power Bank.
• Compatible with MagSafe, Qi2, or Qi-enabled devices utilizing a magnetic case or magnetic sticker.
• Keep away from water or other liquids.
• CAUTION: Risk of fire and burns. Do not open, crush, heat above (35°C) or incinerate.