View Product Page

Does the SM1 keyboard feature MX stabilizers?

Yes, the SM1 keyboard features stabilizers for the following keys: Delete, Return (Enter), Left Shift, Space Bar

How do I turn off the backlight for the SM1 Keyboard?

To turn the backlight on or off, hold the backlight key with the lightbulb icon for more than 5 seconds. This will enable/disable the backlight function of the keyboard.

Does the SM1 keyboard support VIA key mapping?

The SM1 Mechanical Keyboard is not equipped with a VIA chip and does not support VIA key mapping.

Can I purchase or use my own keycaps on the SM1 Slim Mechanical Backlit Bluetooth Keyboard?

Yes. You can purchase or use your own keycaps for a more customized look. Just make sure to use Low Profile MX style keycaps.

How do the mechanical switches feel when typing on the SM1 Slim Mechanical Backlit Bluetooth Keyboard?

The keyboard uses Low Profile MX style Brown switches. These are light tactile switches with a slight bump offering more accuracy when typing, gaming, or productivity tasks.

What are the dimensions of the SM1 Slim Mechanical Backlit Bluetooth Keyboard?

• Weight - 471g
• Length - 308mm
• Width - 119mm

• Height - 24mm

   

Keyboard Shortcuts

• FN + Left CTRL + DEL ; Factory reset (clears Bluetooth profiles)
• FN + DEL ; Lock Screen (Mac only)
• FN + ESC ; Swap F1-F12 keys between Hot Keys and Function keys
• F1 & F2 ; Adjust Display Brightness
• F3 ; Mission Control (Mac)
• F4 ; Spotlight Search (Mac)
• F5 & F6 ; Adjust Keyboard Brightness
• F7/ F8/ F9 ; Media Controls (Previous, Play/Pause, Forward)
• F10/ F11/ F12 ; Volume Controls (Mute, Lower, Raise)
• Scissors ; Screenshot Display
• Lightbulb ; Change Backlight mode; Hold for 5 seconds to turn backlight off; 14 Backlight modes

Keyboard Connectivity Modes

• FN + 1 ; Bluetooth Profile 1
• FN + 2 ; Bluetooth Profile 2
• FN + 3 ; USB-A Wireless Receiver
• FN + 4 ; Wired Mode

Why is the ESC key flashing?

If the ESC key is flashing, the keyboard is set so the F1-F12 keys work as standard function keys instead of media shortcuts.

This setting is controlled using the FN + ESC shortcut.

• F1-F12 work as normal function keys
• Media controls (volume, brightness, play/pause) require holding the FN key

1. Press FN + ESC again.
2. The ESC key will stop flashing.

When the ESC key stops flashing, the media shortcut keys work normally without holding FN.

How do I reset the SM1 Slim Mechanical Backlit Bluetooth Keyboard?

If the keyboard is not responding correctly, experiencing connection or pairing issues, input lag, missing keystrokes, or backlight/function irregularities, a reset may help resolve the issue.

With the keyboard powered on, press and hold FN + Left Ctrl + DEL for 3-5 seconds. The backlight will shut off, flash 3x, then the keyboard will be reset. Pairing will need to be redone.

How long will the battery last?

16.5 hours with backlight enabled

Approximately 2 months with backlight disabled

Is the battery built in or replaceable?

The SM1 uses a built-in Lithium-Ion Battery (non-replaceable).

Input: 5V-0.8A

Capacity: 2500mAh

Low Battery: When voltage < 3.5V, the LED on the spacebar flashes slowly, backlight shuts off, and keyboard enters power saving mode. Recommended charging time is 2-3 hours for full charge.

How do I pair and swap between Bluetooth, USB-A Wireless Receiver, and Wired modes?

On the number row of your keyboard, you'll find the 1, 2, 3 and 4 keys with icons representing the different modes that you'll be able to use and swap between when pressing the corresponding key while holding down the fn key (located on the bottom right of the keyboard).

• 1 Key - Bluetooth Profile 1
• 2 Key - Bluetooth Profile 2
• 3 Key - USB-A Wireless Receiver
• 4 Key - Wired Mode

1. While holding down the fn key, press and hold down either the 1 or 2 key for 5-6 seconds and let go.
2. The corresponding key would rapidly flash, which indicates that the keyboard is in pairing mode.
3. Within your host device's Bluetooth settings, you'll be able to locate the keyboard as ready to pair and could be named either Bluetooth Keyboard or Slim SM1 Keyboard.
4. Once connected, then you should be good to go!

1. Connect the included USB-A Receiver to your host device.
2. While holding down the fn key, press the 3 key and the keyboard should pair with the wireless receiver.
3. he wireless receiver would also function if it's connected to either a docking station, hub, or adapter as long as those devices are connected to the intended host device.

1. Connect a USB-C cable between the keyboard and your host device
2. While holding down the fn key, press the 4 key to put the keyboard into wired mode and the keyboard should be ready to use.
3. Wired mode can also function if it's connected to either a docking station, hub, or adapter as long as those devices are connected to the intended host device.

Are the mechanical switches hot-swappable?

No, the switches are soldered and not replaceable.

Could I use this keyboard between Windows and Mac devices?

The SM1 keyboard can be used with both Mac and Windows computers.

The keyboard is set up for Mac use by default. The key labels match Mac keys. To support Windows users, the box includes extra keycaps:

• 2 Windows (WIN) keys
• 2 Alt keys

You may replace the Mac keycaps with these if you prefer a Windows-style layout.

How to swap between Mac and Windows modes?

The keyboard starts in Mac mode by default. You can switch modes based on the computer you are using.

• O key = Mac mode
• P key = Windows mode

1. Press and hold the FN key.
2. While holding FN, press O for Mac or P for Windows.
3. Release the keys.

The selected key will briefly flash to confirm the change.

When the flashing stops, the keyboard is set to the selected mode.