View Product Page

This Quick Start Guide covers setup of the Satechi C1 USB-C Wired Mouse (ST-AWUCMM): plugging into a USB-C port for plug-and-play use, the mouse buttons and scroll wheel, and cycling the adjustable DPI levels.

Setup steps:

Step 1: Plug the C1 Wired Mouse into a USB-C port on your device.

Step 2: Once plugged in, the mouse will be detected by your device – no extra installation needed.

Step 3: The mouse is equipped with left/right buttons, scroll wheel, and an adjustable DPI button.

Step 4: Click on the adjustable DPI button to scroll through its four levels - 800/1200/2400/3200.

Default level is 1200 DPI