View Product Page

This Quick Start Guide covers setup of the Satechi 3-in-1 Foldable Wireless Charging Stand with Qi2 25W (ST-Q25F31C-EA): unfolding the stand, setting up the power adapter and international plugs, and charging your phone, AirPods, and Apple Watch.

Setup steps:

Step 1: Unfold the Charging Stand

• Unfold the stand into the upright position.
• The foldable design allows compact storage for travel or home use.

Step 2: Connect the USB-C Cable to the Power Adapter

• Connect the included USB-C cable to the 45W USB-C Power Delivery adapter.
• The Type A plug is installed by default.

Step 3: Install an International Adapter If Needed

• Fold the default plug so the outlet prongs face upward.
• Align the international adapter with the default plug housing.
• Includes adapters: Type C and Type G.

Step 4: Secure the International Adapter in Place

• Press the international adapter firmly until it snaps into place and sits flush with the top of the power adapter.
• To remove it, push upward until the adapter releases.

Step 5: Plug the Stand into Power

• Connect the included 1M USB-C cable to the rear USB-C input port.
• Input requirement: 45W USB-C PD.

Step 6: Charge Your Phone (Qi2 25W)

• Place a compatible smartphone on the magnetic Qi2 25W charging surface. Magnetic alignment supports secure placement and portrait or landscape viewing.
• Supports wireless charging output up to 25W (MPP/BPP).

Step 7: Charge Your AirPods (5W Wireless Pad)

• Place AirPods or Qi-compatible earbuds on the base charging pad.
• Output: up to 5W.

Step 8: Charge Your Apple Watch (Up to 5W Fast Charging)

• Fold down the Apple Watch charging module and place your watch on the charger.
• Output: up to 5W.
• Fast charging supported on Apple Watch Series 7 & later and Apple Watch SE (3rd Gen).