View Product Page

This User Manual covers setup, features, compatibility, and specifications for the Satechi FindAll™ Magnetic Wallet Stand.

Product Overview

This MagSafe-compatible wallet snaps onto the back of your iPhone, holds up to 3 cards, folds out into an adjustable stand, and is trackable from your phone. It is the rare tracker that works on both sides of the fence: pair it with Apple Find My on iPhone or with Google Find Hub on Android, and you can view its location, even when your wallet and phone part ways. The built-in battery lasts up to 8 months per charge and recharges on any MagSafe, Qi, or Qi2 wireless charger.

Setup

No cables or tools required: power on the wallet stand, then pair it with Apple Find My on iPhone or Google Find Hub on Android. Keep the app open and stay within Bluetooth range while pairing.

Power On, Off, and Factory Reset

1. Power on: Press the power button once. You will hear a confirmation sound, indicating it is turned on.
2. Power off: Quick-press the power button 2 times, then long-press the 3rd time for at least 5 seconds. You will hear two beeps, indicating your FindAll™ Magnetic Wallet Stand is powered off. (When the device is powered off, you cannot find or view its location.)
3. Factory reset: Quick-press the power button 4 times, then long-press the 5th time for at least 3 seconds. You will hear a confirmation sound, indicating the factory reset is complete.

Note: If your FindAll™ Magnetic Wallet Stand is not paired within 10 minutes, you will hear a beep and it will automatically power off. Power on to continue pairing.

Pairing with Apple Find My (iPhone)

1. Open Find My: Open the Apple Find My app.
2. Add New Item: In the Items tab, tap Add New Item.
3. Other Supported Item: Tap Other Supported Item (your iPhone will search for your FindAll™ Wallet Stand).
4. Connect: Once "FindAll Magnetic Wallet Stand" is detected, tap Connect.
5. Name and register: Follow the onscreen steps to name it and register it to your Apple ID.
6. Verify: Ensure your FindAll™ Magnetic Wallet Stand appears in Items. If not, remove the item, perform a factory reset (see above), then reconnect.

Pairing with Google Find Hub (Android)

1. Open Find Hub: Open the Find Hub app.
2. Power on: Power on the FindAll™ Magnetic Wallet Stand and follow the onscreen pop-up.
3. Continue: Read the "Use responsibly" message and press Continue.
4. Finish: Once the FindAll™ Magnetic Wallet Stand is connected, select Done or Open app to access additional settings.
5. Rename (optional): Open Settings in the Find Hub app, press the pencil icon, add the name you want, and press Rename.
6. Remove (if needed): Open Settings in the Find Hub app, select Remove from Find Hub, press Remove, and follow the prompts.

Charging

1. Place on charger: Place the FindAll™ Magnetic Wallet Stand on a compatible MagSafe, Qi, or Qi2 wireless charger, ensuring it is aligned with the magnetic ring.
2. Listen for confirmation: A confirmation sound will play to indicate that charging has started.

Note: Wireless charger not included.

LED Indicators: Orange: charging. Green: fully charged.

Battery: Battery life up to 8 months on a single charge (may depend on use of the device). Recommended to fully charge your FindAll™ Magnetic Wallet Stand once every 6 months.

Functions

Parts labeled diagram of the FindAll™ Magnetic Wallet Stand with 6 labeled components.

1. Front Pocket (3 Cards Max.): The card pocket on the front of the wallet. Holds up to 3 cards; loading more can stretch the pocket and affect the fit.
2. Adjustable Stand (87° max limit): The fold-out kickstand behind the wallet. Props your iPhone at any angle up to 87° in portrait or landscape. Do not force it past the 87° limit.
3. Built-in Magnet (MagSafe Compatible): The magnet ring on the phone-facing side. Snaps onto MagSafe iPhones or MagSafe-compatible cases, and aligns the wallet on wireless chargers.
4. ID Window: The clear window inside the front pocket for an ID card, so you can show it without removing the card.
5. LED Indicator Light: The small status light on the back. Orange while charging, green when fully charged.
6. Power On Button: The power button on the back. One press powers the wallet stand on. Quick-press 2 times then long-press the 3rd time (5+ seconds) to power off. Quick-press 4 times then long-press the 5th time (3+ seconds) to factory reset.

Features

- Holds up to 3 cards, with an ID window for quick card display.
- Works with the Apple Find My app on iPhone, iPad, and Mac.
- Works with the Google Find Hub app on Android 9 and later.
- Adjustable stand props your phone up to 87° in portrait or landscape.
- MagSafe-compatible magnet attaches to iPhones and MagSafe cases.
- Battery life up to 8 months on a single charge (may depend on use), with an 80 mAh battery.
- Cable-free wireless charging on any MagSafe, Qi, or Qi2 charger.

Important Limitations

iOS requirements: Works with the Apple Find My app on devices running iOS 14.5 or later; the latest version of iOS, iPadOS, or macOS is recommended. The Apple Watch Find Items app requires the latest version of watchOS.

macOS requires iPhone or iPad first: Compatible with devices running macOS 12.5 and later, but the wallet stand must initially be paired with an iPhone or iPad.

Android requirements: Location services and Google Location Sharing must be turned on, and an internet connection is required. Google Find Hub is available on Android 9 and later, in certain countries, for age-eligible users.

One network at a time: The wallet stand pairs with either Apple Find My or Google Find Hub. To switch networks, remove it from the current app and factory reset before re-pairing.

Wireless charger not included: Compatible with Qi, Qi2, and MagSafe wireless chargers, sold separately.

Connection range: 40 m.

No tracking while powered off: When the device is powered off, you cannot find or view its location.

Auto power off: If the wallet stand is not paired within 10 minutes of powering on, it will beep and automatically power off. Power on to continue pairing.

Magnets and medical devices: This product contains magnets that may interfere with pacemakers or other medical devices. Maintain a safe distance between this product and your medical device, and consult your physician or medical device manufacturer for guidance specific to your device.

Temperature and handling: Do not expose the device to temperatures below -10°C (14°F) or above 35°C (95°F), open flame, corrosive liquids, or high humidity. Do not disassemble, modify, or use sharp objects on the device; this can cause serious damage and void the warranty. Always check the device for damage before use; if damaged, do not use it.

Care: Wipe clean with a soft, dry cloth. Store in a cool, dry place when not in use.

Specifications

Model: MN26STA01
Card Capacity: Up to 3 cards
Stand Angle: Adjustable, up to 87°
Battery: 80 mAh rechargeable, up to 8-month battery life
Charging: Wireless (MagSafe, Qi, and Qi2 compatible)
Connection Range: 40 m
Tracking Networks: Apple Find My (iOS 14.5 or later, macOS 12.5 or later) and Google Find Hub (Android 9 or later)

Certifications

FCC, CE, WEEE