This Quick Start Guide covers setup of the Satechi FindAll™ Magnetic Wallet Stand (ST-LFMWSK, ST-LFMWSW, ST-LFMWSU): charging it, turning it on, pairing it with Apple Find My or Google Find Hub, adding your cards, and turning it off or resetting it.
Setup steps:
Step 1: Charge the Wallet Stand
- Place the wallet stand on a MagSafe, Qi, or Qi2 wireless charger (not included), aligned with the magnetic ring.
- A confirmation sound plays when charging starts.
- The LED indicator light is orange while charging and green when fully charged.
- Battery life is up to 8 months on a single charge (may depend on use of the device). Fully charging it once every 6 months is recommended.
Step 2: Turn It On
- Press the power button once. You will hear a confirmation sound, indicating it is turned on.
- If it is not paired within 10 minutes, it beeps and powers off automatically. Press the power button once to turn it back on and continue pairing.
Step 3: Pair with Apple Find My (iPhone)
- Open the Apple Find My app.
- In the Items tab, tap Add New Item.
- Tap Other Supported Item. Your iPhone searches for the wallet stand.
- When "FindAll Magnetic Wallet Stand" is detected, tap Connect.
- Follow the onscreen steps to name it and register it to your Apple ID.
- Check that the wallet stand appears in Items. If it does not, remove the item, factory reset the wallet stand (see Step 6), then connect it again.
Requires iOS 14.5 or later. To use it on a Mac (macOS 12.5 or later), pair it with an iPhone or iPad first.
Step 4: Or Pair with Google Find Hub (Android)
- Open the Find Hub app.
- Turn on the wallet stand and follow the onscreen pop-up.
- Read the "Use responsibly" message and press Continue.
- When the wallet stand is connected, select Done or Open app to access more settings.
Requires Android 9 or later on select devices. Location services, Bluetooth, and Google Location Sharing must be turned on, and a cell service or internet connection is required.
Step 5: Add Your Cards and Use the Stand
- Front Pocket: holds up to 3 cards.
- Adjustable Stand: adjusts up to an 87° max limit.
- Built-in Magnet: MagSafe compatible.
- ID Window
- LED Indicator Light: orange while charging, green when fully charged.
- Power On Button
Step 6: Turn It Off or Factory Reset
- Power off: quick-press the power button 2 times, then long-press the 3rd time for at least 5 seconds. You will hear two beeps, indicating it is powered off. When it is powered off, you cannot find or view its location.
- Factory reset: quick-press the power button 4 times, then long-press the 5th time for at least 3 seconds. You will hear a confirmation sound, indicating the factory reset is complete.
Specifications
- Model: MN26STA01
- Card Capacity: Up to 3 cards
- Stand Angle: Adjustable, 87° max limit
- Battery: 80 mAh, battery life up to 8 months on a single charge
- Charging: Wireless (MagSafe, Qi, and Qi2 compatible)
- Connection Range: 40 m
- Tracking Networks: Apple Find My (iOS 14.5 or later, macOS 12.5 or later) and Google Find Hub (Android 9 or later)
Important Notes
- Wireless charger not included.
- This product contains magnets that may interfere with pacemakers or other medical devices. Maintain a safe distance between this product and your medical device, and consult your physician or medical device manufacturer for information specific to your device.
- Do not expose the device to temperatures below -10°C (14°F) or above 35°C (95°F), open flame, corrosive liquids, or high humidity.
- Wipe clean with a soft, dry cloth. Store in a cool, dry place when not in use.
Certifications: FCC, CE, WEEE, ISED
Comments
0 comments
Please sign in to leave a comment.