View Product Page

Instruction Manual — Vegan Leather Magnetic Wallet Stand

This manual covers setup and features for the Satechi Vegan Leather Magnetic Wallet Stand (Models: ST-VLWK / ST-VLWN / ST-VLWB / ST-VLWO / ST-VLWR / AP-MWSB / AP-MWSV / AP-MWSL / AP-MWSK / AP-MWST).

📄 Download User Manual — Vegan Leather Magnetic Wallet Stand · PDF · 2.7 MB

In the Box

Vegan Leather Magnetic Wallet Stand, User Manual.

Specifications

Models: ST-VLWK / ST-VLWN / ST-VLWB / ST-VLWO / ST-VLWR / AP-MWSB / AP-MWSV / AP-MWSL / AP-MWSK / AP-MWST
Dimensions: 75 × 115 mm
Construction: Vegan leather exterior
Magnet: MagSafe compatible built-in magnet
Hinge: Adjustable up to 160°
Front Pocket: Up to 2 cards (supports 1 NFC card with pass-through)
Inside Pocket: Up to 2 cards (NFC pass-through not supported)
NFC: Front pocket pass-through only — not compatible with all payment terminals

Parts Reference

1. Built-in Magnet (MagSafe Compatible) — The MagSafe-compatible magnet on the back of the wallet. Allows the wallet to snap and hold to the back of any MagSafe-compatible phone or MagSafe/magnetic case without any attachment accessories. Also compatible with a magnetic sticker or magnetic case.
2. Adjustable Hinge (160° Limit) — The metal hinge along the back edge of the wallet that allows it to fold open and prop your phone up as a stand. Adjustable up to 160°. Do not open beyond 160° — this may damage the hinge.
3. Front Pocket (2 Cards Max. — Supports 1 NFC Card) — The front-facing card pocket. Holds up to 2 cards. Supports NFC pass-through for 1 NFC-enabled card at a time. NFC pass-through is not compatible with all payment terminals.
4. ID Window — A clear viewing window at the bottom of the wallet for displaying an ID, transit card, or other card without removing it.
5. Inside Pocket (2 Cards Max.) — The interior card pocket. Holds up to 2 cards. Does not support NFC pass-through.

Setup

Step 1 — Insert your cards: Open the wallet and insert your cards into the Front Pocket (Port 3) and/or the Inside Pocket (Port 5). Each pocket holds up to 2 cards. Inserting more than 2 cards per pocket may prevent the wallet from attaching properly to your phone.
Step 2 — Attach to your phone: Hold the wallet near the back of your MagSafe-compatible iPhone. The built-in magnets (Port 1) will automatically snap the wallet into alignment on the back of the phone. For use with a non-MagSafe case, your case must include magnets, or use a magnetic sticker or MagSafe-compatible magnetic attachment (sold separately).
Step 3 — Use as a stand (optional): Open the hinge (Port 2) to prop your phone up for hands-free viewing. The hinge adjusts up to 160°.

Important Notes

Only compatible with MagSafe phones, MagSafe cases, or magnetic cases: The wallet attaches via built-in MagSafe-compatible magnets. It will only hold securely to MagSafe-compatible iPhones (iPhone 12 and later), MagSafe cases, or cases with embedded magnets. Standard non-magnetic cases are not compatible without a magnetic sticker or adapter.

NFC pass-through — front pocket only, 1 card at a time: The front pocket (Port 3) supports NFC pass-through for contactless payments and transit cards. Only one NFC-enabled card should be in the front pocket at a time. The inner pocket (Port 5) does not support NFC pass-through. Note that NFC pass-through is not compatible with all payment terminals.

Card limit per pocket: Each pocket holds a maximum of 2 cards. Adding more than 2 cards may reduce magnetic hold strength and prevent proper attachment to your phone.

Do not open the hinge beyond 160°: The adjustable hinge (Port 2) opens up to 160°. Forcing it open beyond this limit may damage the metal hinge.

Frequently Asked Questions

Which phones are compatible with this wallet stand?
The wallet is compatible with MagSafe-compatible iPhones (iPhone 12 and later). It also works with MagSafe cases, cases that include built-in magnets, or with a magnetic sticker attachment. Non-magnetic cases are not compatible.

Can I use NFC cards in both pockets?
NFC pass-through is only supported in the front pocket (Port 3), one NFC card at a time. The inside pocket (Port 5) does not support NFC pass-through.

Why isn't my contactless payment working?
NFC pass-through is not compatible with all payment terminals. If a terminal is not working, try removing the card from the pocket and tapping it directly. Also ensure only one NFC card is in the front pocket.

Can I use this wallet stand without a MagSafe phone?
Yes, if your phone case has built-in magnets or if you use a MagSafe-compatible magnetic sticker attachment (sold separately). The wallet relies on magnetic force, so a magnetic-compatible case or attachment is required.

Safety Instructions

Warning: Damage may occur if the following instructions are not followed.

1. Do not open the hinge beyond 160° — this may damage the metal hinge.
2. Keep the wallet away from water and moisture.
3. Do not expose to extreme heat or direct sunlight for extended periods.
4. Do not place near devices or cards sensitive to magnetic fields (e.g., hotel keycards using certain magnetic stripe technology may be affected by proximity to the magnets).

Need Help?

Contact Satechi Support at support.satechi.com or email support@satechi.com.
Phone: +1 858 268 1800 | Website: www.satechi.com