View Product Page

This User Manual covers setup, features, compatibility, and specifications for the Satechi Vegan Leather Magnetic Wallet Stand (ST-VLWK / ST-VLWN / ST-VLWB / ST-VLWO / ST-VLWR / AP-MWSB / AP-MWSV / AP-MWSL / AP-MWSK / AP-MWST).

What's In The Box

Vegan Leather Magnetic Wallet Stand, User Manual.

Product Overview

This wallet snaps magnetically onto the back of a MagSafe-compatible iPhone or case, carries up to 4 cards, and folds out into a phone stand. The front pocket lets you tap to pay through the wallet with one NFC-enabled card, the ID window shows a badge or transit card without removing it, and the metal hinge props your phone at any angle up to 160° in portrait or landscape. No electronics, no charging: it is a wallet, a stand, and a card shield in one piece of vegan leather.

Setup

No tools required: load your cards, then snap the wallet onto your phone.

1. Insert your cards: Slide up to 2 cards into the Front Pocket (only one NFC-enabled card at a time) and up to 2 cards into the Inside Pocket. An ID placed behind the ID Window stays visible without being removed.

2. Attach the wallet to a MagSafe Compatible phone or MagSafe Case: Hold the wallet against the back of the phone and the built-in magnet will snap it into alignment. Also compatible with a magnetic sticker or magnetic case.

Using the stand: Fold the wallet open and rest it on a flat surface to prop your phone in portrait or landscape. The hinge adjusts to any angle up to its 160° limit.

Functions

Parts labeled diagram of the Vegan Leather Magnetic Wallet Stand with 5 labeled components.

1. Built-in Magnet (MagSafe Compatible): The magnet array inside the phone-facing panel. Snaps the wallet onto MagSafe-compatible phones, MagSafe or magnetic cases, or a magnetic sticker. It will not hold onto non-MagSafe cases or cases without magnets.
2. Adjustable Hinge (160° Limit): The metal hinge along the top edge. Lets the wallet fold open into a stand at any angle up to 160°. Opening it further can damage the hinge.
3. Front Pocket (2 Cards Max.) (Supports 1 NFC Card): The outer card pocket. Holds up to 2 cards and supports NFC pass-through for 1 NFC-enabled card at a time; pass-through is not compatible with all payment terminals.
4. ID Window: The clear oval window in the front pocket. Displays an ID, badge, or transit card without removing it from the wallet.
5. Inside Pocket (2 Cards Max.): The interior card pocket. Holds up to 2 cards. Does not support NFC pass-through.

Features

- Snaps onto MagSafe iPhones, MagSafe cases, and magnetic cases with no adapters.
- Holds up to 4 cards: 2 in the front pocket, 2 in the inside pocket.
- Tap to pay through the front pocket with 1 NFC-enabled card.
- ID window shows a card without taking it out.
- Folds into a phone stand, portrait or landscape, at any angle up to 160°.
- Premium vegan leather exterior.

Important Limitations

NFC is not universal: The NFC pass-through feature is not compatible with all payment terminals.

One NFC card at a time: Only one NFC-enabled card can be inserted at a time in the front pocket.

MagSafe only: The wallet will only magnetize to MagSafe-compatible phones or MagSafe/magnetic cases. Non-MagSafe cases and cases without magnets are not compatible with the wallet.

Inside pocket has no NFC: The inner pocket does not support the NFC pass-through feature.

160° hinge limit: Do not open the wallet further than 160 degrees. Doing so may damage the metal hinge.

2 cards per pocket: Each card pocket can hold up to 2 cards. Any additional cards will cause the pocket to stretch.

Specifications

Model: ST-VLWK / ST-VLWN / ST-VLWB / ST-VLWO / ST-VLWR / AP-MWSB / AP-MWSV / AP-MWSL / AP-MWSK / AP-MWST
Dimensions: 4.1 x 2.6 x 0.4 in (10.4 x 6.6 x 1 cm)
Weight: 3 oz (84.5 g)
Material: Vegan leather
Magnet: Built-in, MagSafe compatible
Hinge: Adjustable, up to 160°
Card Capacity: Up to 4 cards (2 front with 1 NFC pass-through, 2 inside)