View Product Page

Instruction Manual — Vegan-Leather FindAll™ Passport Cover

This manual covers setup and features for the Satechi Vegan-Leather FindAll™ Passport Cover (Models: ST-VPCK / ST-VPCW / ST-VPCR).

📄 Download User Manual — Vegan-Leather FindAll™ Passport Cover · PDF · 7.0 MB

In the Box

Vegan-Leather FindAll™ Passport Cover, User Manual. (Wireless charger not included.)

Specifications

Models: ST-VPCK (Black) / ST-VPCW (Sand) / ST-VPCR (Desert Rose)
Dimensions: 5.6 × 4.2 × 0.7 in (14.3 × 10.6 × 1.7 cm)
Weight: 104 g / 3.7 oz
Construction: Vegan leather
RFID Blocking: Yes

Electronics:
Wireless Charging Input: 2.5W (MagSafe / Qi / Qi2 compatible)
Battery: 150 mAh rechargeable lithium — up to 8-month battery life
Wireless Technology: Bluetooth 5.2
Speaker Volume: 80–90 dB
Bluetooth Range: 32–64 ft / 10–20 m (indoors) · 64–160 ft / 20–49 m (outdoors)

Parts Reference

1. Wireless Charging — The circular wireless charging area on the back of the cover (marked with the Satechi logo). Place the cover on a MagSafe, Qi, or Qi2 wireless charger to recharge the internal battery. Wireless charger not included.
2. 4× Card Holder — Four card-sized slots on the left interior panel. Holds up to 4 cards (credit cards, transit cards, etc.). The cover also features RFID-blocking technology to protect card data.
3. On/Off Button — The power button at the bottom of the cover. Press once to power on. Quick-press twice then hold the third press for 5+ seconds to power off. Quick-press four times then hold the fifth press for 3+ seconds for factory reset.
4. LED Indicator — The LED light near the bottom. Orange = charging. Green = fully charged.
5. Passport Holder — The full-size pocket on the right interior panel. Designed to hold a standard passport securely.

Setup — Pairing with Apple Find My

Step 1 — Power on: Press the On/Off Button (Port 3) once. You will hear a confirmation sound indicating the cover is powered on.
Step 2 — Open Apple Find My: On your iPhone, open the Find My app and go to the Items tab.
Step 3 — Add the cover: Tap Add New Item, then tap Other Supported Item. Your iPhone will search for nearby Find My-compatible devices.
Step 4 — Connect: When "Satechi FindAll™ Passport Cover" appears, tap Connect.
Step 5 — Name and register: Follow the onscreen steps to name the cover and register it to your Apple ID. Verify it appears in your Items list.
Step 6 — Load your passport and cards: Insert your passport into the Passport Holder (Port 5) and your cards into the Card Holder (Port 2).

Charging

Charge the FindAll™ Passport Cover by placing the wireless charging area (Port 1) on a MagSafe, Qi, or Qi2 wireless charger (not included). The LED (Port 4) will show orange while charging and green when fully charged. Battery life is up to 8 months on a single charge. Satechi recommends charging every 6 months to maintain battery health.

Power On / Off / Reset

Power on: Press the button (Port 3) once. A confirmation sound will play.
Power off: Quick-press the button twice, then long-press the third time for at least 5 seconds. Two beeps confirm it is powered off. When powered off, the cover cannot be located in Find My.
Auto power off: If the cover is not paired within 10 minutes of powering on, it will beep and automatically power off.
Factory reset: Quick-press the button four times, then long-press the fifth time for at least 3 seconds. A confirmation sound indicates the reset is complete. After a factory reset, re-pair via the Find My app.

Important Notes

Requires iPhone with Apple Find My: This cover uses Bluetooth 5.2 and the Apple Find My network for item tracking. An iPhone with the Find My app and an Apple ID is required for tracking functionality.

Wireless charger not included: A MagSafe, Qi, or Qi2 wireless charger is required for charging and is sold separately.

RFID blocking: The cover features RFID-blocking technology to protect your cards from unauthorized scanning.

Operating temperature: Keep the cover between -10°C (14°F) and 35°C (95°F). Do not expose to open flame or submerge in water.

Frequently Asked Questions

Does this work with Android phones?
No. The FindAll™ Passport Cover uses the Apple Find My network. It requires an iPhone with the Find My app. Android is not supported.

How long does the battery last?
Up to 8 months on a single charge. Satechi recommends charging the cover once every 6 months to maintain battery health.

How do I charge it?
Place the circular wireless charging area (Port 1, marked with the Satechi logo) on any MagSafe, Qi, or Qi2 wireless charger (sold separately). Orange LED = charging; green LED = fully charged.

Can I find it if it's out of Bluetooth range?
Yes. The FindAll™ Passport Cover uses the Apple Find My network, which leverages nearby Apple devices to help locate your item even when out of direct Bluetooth range.

Why isn't my cover appearing in Find My during pairing?
Ensure the cover is powered on (you should hear a confirmation sound). If pairing does not complete within 10 minutes, the cover will auto power off — press the button once to power on again and retry. If still not found, perform a factory reset (4 quick presses + 1 long press) and re-pair.

Safety Instructions

Warning: Do not expose this device to temperatures below -10°C (14°F) or above 35°C (95°F). Do not expose to open flame. Do not submerge in water — this will permanently damage the device. Keep away from liquids and moisture.

Need Help?

Contact Satechi Support at support.satechi.com or email support@satechi.com.
Phone: +1 858 268 1800 | Website: www.satechi.com