View Product Page

This User Manual covers setup, features, compatibility, and specifications for the Satechi Vegan-Leather FindAll™ Passport Cover (ST-VPCK / ST-VPCW / ST-VPCR).

What's In The Box

Vegan-Leather FindAll™ Passport Cover, User Manual. (Wireless charger not included.)

Product Overview

This cover keeps your passport, boarding pass, and up to four cards in one place and makes them trackable in the Apple Find My app. Pair it once with your iPhone, and you can view its location from your iPhone, iPad, Mac, or Apple Watch, with help from the Find My network even when it is out of Bluetooth range. There are no cables to plug in: the built-in battery recharges on any MagSafe, Qi, or Qi2 wireless charger and runs for months on a single charge.

Setup

No cables or tools required: power on the cover, then add it as an item in the Apple Find My app on your iPhone.

1. Prepare: Ensure your iPhone is set up and your FindAll™ Passport Cover is powered on. To power on, press the On/Off Button once: you will hear a confirmation sound.
2. Open Find My: Open the Apple Find My app.
3. Add New Item: In the Items tab, tap Add New Item.
4. Other Supported Item: Tap Other Supported Item (your iPhone will search for your FindAll™ Passport Cover).
5. Connect: Once "Satechi FindAll™ Passport Cover" is detected, tap Connect.
6. Name and register: Follow the onscreen steps to name it and register it to your Apple ID.
7. Verify: Ensure your FindAll™ Passport Cover appears in Items. If not, remove the item, perform a factory reset (see below), then reconnect.

Note: Do not leave the Apple Find My app while pairing your FindAll™ Passport Cover.

Power On, Off, and Factory Reset

1. Power on: Press the power button once. You will hear a confirmation sound, indicating it is turned on.
2. Power off: Quick-press the power button 2 times, then long-press the 3rd time for at least 5 seconds. You will hear two beeps, indicating your FindAll™ Passport Cover is powered off. (When the device is powered off, you cannot find or view its location.)
3. Factory reset: Quick-press the power button 4 times, then long-press the 5th time for at least 3 seconds. You will hear a confirmation sound, indicating that the factory reset is complete.

Note: If your FindAll™ Passport Cover is not paired within 10 minutes, you will hear a beep and it will automatically power off. Power on to continue pairing.

Charging

Charge your FindAll™ Passport Cover by placing the wireless charging area (marked with the Satechi logo on the back) on a MagSafe, Qi, or Qi2 wireless charger. Note: Wireless charger not included.

LED Indicators: Orange: charging. Green: fully charged.

Battery: Battery life up to 8 months on a single charge (may depend on use of the device). Recommended to fully charge your FindAll™ Passport Cover once every 6 months.

Functions

Parts labeled diagram of the Vegan-Leather FindAll™ Passport Cover with 5 labeled components.

1. Wireless Charging: The circular charging area on the back of the cover, marked with the Satechi logo. Place this area on a MagSafe, Qi, or Qi2 wireless charger to recharge the built-in battery. Wireless charger not included.
2. 4× Card Holder: Four card slots on the left interior panel for credit, transit, or ID cards. RFID protection helps shield your cards from unauthorized scanning.
3. On/Off Button: The power button on the front left panel. One press powers the cover on. Quick-press 2 times then long-press the 3rd time (5+ seconds) to power off. Quick-press 4 times then long-press the 5th time (3+ seconds) to factory reset.
4. LED Indicator: The small status light below the power button. Orange while charging, green when fully charged.
5. Passport Holder: The full-size pocket on the right interior panel. Holds one standard passport; two passports is a tight fit and not recommended.

Features

- Works with Apple Find My: locate the cover from your iPhone, iPad, Mac, or the Find Items app on Apple Watch.
- Cable-free wireless charging on any MagSafe, Qi, or Qi2 charger.
- Battery life up to 8 months on a single charge (may depend on use).
- Holds one passport and up to 4 cards, with RFID protection for your cards.
- Premium vegan leather in Black, Sand, and Desert Rose.

Important Limitations

Requires an iPhone or iPad for setup: Compatible with iOS, iPadOS, and macOS after initial pairing with an iPhone or iPad. Android devices are not supported.

Wireless charger not included: Compatible with Qi, Qi2, and MagSafe wireless chargers, sold separately.

Connection range: 10 to 20 m indoors, 20 to 50 m outdoors.

No tracking while powered off: When the device is powered off, you cannot find or view its location in Find My.

Auto power off: If the cover is not paired within 10 minutes of powering on, it will beep and automatically power off. Power on to continue pairing.

Temperature and water: Do not expose the device to temperatures below -10°C (14°F) or above 35°C (95°F). Do not expose it to an open flame or submerge it in water, as this will damage the device.

Do not disassemble or modify: Disassembling, modifying, or using sharp objects on the device, or exposing it to corrosive liquids or high humidity, can seriously damage it and void the warranty. Always check the device and accessories for damage before use; if damaged, do not use the device.

Specifications

Model: ST-VPCK (Black) / ST-VPCW (Sand) / ST-VPCR (Desert Rose)
Dimensions: 5.6 x 4.2 x 0.7 in (14.3 x 10.6 x 1.7 cm)
Weight: 104 g / 3.7 oz
Material: Vegan leather with RFID protection
Wireless Charging Input: 2.5W (MagSafe, Qi, and Qi2 compatible)
Battery: 150 mAh rechargeable lithium, up to 8-month battery life
Wireless Technology: Bluetooth 5.2
Speaker Volume: 80 to 90 dB
Connection Range: 10 to 20 m indoors, 20 to 50 m outdoors

Certifications

FCC, CE, WEEE, ISED