View Product Page

This User Manual covers setup, features, compatibility, and specifications for the Satechi 4-in-1 USB-C Hub with 2.5 Gigabit Ethernet (ST-H3C25EM).

Product Overview

The 4-in-1 USB-C Hub with 2.5 Gigabit Ethernet connects to a USB-C host device and gives you a 2.5 Gigabit Ethernet port and three 10Gbps USB-C data ports, on a durable braided cable.

Setup

The 4-in-1 USB-C Hub with 2.5 Gigabit Ethernet is plug and play.

1. Connect to a USB-C host device: Plug the hub's USB-C connector into your USB-C host device.

2. Connect your devices: Connect your devices to the hub's ports.

Functions

Parts labeled diagram of the 4-in-1 USB-C Hub with 2.5 Gigabit Ethernet with 4 labeled components.

1. USB-C Connector: Connects the hub to your USB-C host device.
2. Ethernet Port (2.5 Gigabit): 2.5 Gigabit speeds are only supported with a supporting internet service provider, a router/modem that supports multi-Gigabit speeds, and CAT5 cable and above.
3. 3x USB-C Data Ports (10Gbps): For data transfer only. These ports do not support video output or charging.
4. Durable Braided Cable

Features

- Plug and play
- 2.5 Gigabit Ethernet port
- Three 10Gbps USB-C data ports
- Durable braided cable

Important Limitations

USB-C ports are for data transfer only, they do not support video output or charging.

2.5 Gigabit speeds only supported with supporting internet service providers, router/modem supporting multi-Gigabit speeds, and CAT5 cable and above.

Product designed for USB-C 3.2 Gen 2 host devices and above. Performance may vary depending on host device capabilities.

Specifications

Model: ST-H3C25EM
Connector: USB-C Connector, durable braided cable
Ports & Speeds:
1x Ethernet Port: 2.5 Gigabit
3x USB-C Data Ports: 10Gbps (data transfer only, no video output or charging)
Host Requirement: USB-C 3.2 Gen 2 host devices and above

Certifications

FCC, CE, WEEE, CAN ICES(B)/NMB(B)