The OntheGo™ 7-in-1 Multiport Adapter has a built-in magnetic base. The adapter can attach directly to compatible MagSafe iPhones. For other devices, such as laptops, tablets, phones, or flat cases, use the included 3M Adhesive Ring.

1. Clean the surface where you will place the 3M Adhesive Ring.
2. Before peeling the adhesive, check that the USB-C cable comfortably reaches your device's port. Adjust placement if needed.
3. Remove the protective film from the 3M Adhesive Ring to expose the adhesive.
4. Press the 3M Adhesive Ring firmly onto a clean, flat surface. Avoid curved or textured areas.
5. Attach the OntheGo™ 7-in-1 Multiport Adapter to the ring and connect your devices.

Plan the placement before applying, because the adhesive is meant to be permanent. The magnetic mount does not provide wireless charging.

To check whether your device is confirmed to work with this adapter, see the OntheGo™ 7-in-1 Multiport Adapter Device Compatibility article.