View Product Page

1. Charge the Luggage Tag with a wireless charger (not included). The status light will be orange while charging and green when fully charged.
   • It is recommended to charge once every 6 months. Battery life lasts up to 8 months* on a single charge (may vary depending on usage).
2. To power on the Luggage Tag, press the power button once. It will beep to indicate it is on.
   • If not paired within 10 minutes, it will beep and automatically power off.
3. To power off the Luggage Tag, quickly press the power button 2 times, then long press the 3rd time for at least 5 to 7 seconds. You will hear two beeps, indicating your FindAll™ Luggage Tag is powered off.
   • When device is powered off, you cannot track its location.
   • Luggage Tag
4. Add Item Other Supported Item Connect To pair the Luggage Tag, open the Find My app, tap Add Item under Items, and tap Other Supported Item. Once “Satechi FindAll™ Luggage Tag” is detected, tap Connect.
   • Do not leave the app while pairing the device.
5. To remove the Luggage Tag, open the Find My app, tap the Luggage Tag under Items, tap Remove Item, tap Remove, and confirm to remove.
   • If unable to pair with a new device, a factory reset must be done.
6. To factory reset the Luggage Tag, quickly press the power button 4 times, then long-press for at least 3 seconds, then you will hear a beep confirming the Luggage Tag has been reset.