View Product Page

This Quick Start Guide covers setup of the Satechi Quatro Wireless Power Bank (ST-UC10WPBM): charging the power bank, powering it on, using the wireless pad and Apple Watch module, the USB-C and USB-A ports, and powering off.

Setup steps:

Step 1: Before use, please fully charge the Quatro Power Bank via USB-C port using its included cable.

Four LED lights will illuminate when fully charged

Step 2: Turn on the wireless charger by pressing the power button twice.

Blue LED light will turn on

Step 3: Place a compatible Qi wireless device on the Satechi logo. LED light will turn orange when charging begins.

Max output 5W

Step 4: Place an Apple Watch, display side up, on the module to begin charging.

Max output 2.5W

Step 5: Use the USB-C PD port to quickly recharge the power bank, power Type-C tablets or fast charge compatible devices.

Fast charging requires an USB-C to Lightning cable (sold separately).

Max output 18W input/output

Step 6: Use the USB-A port to charge an extra USB device – such as an iPhone or AirPods.

Max output 12W

Step 7: After use, power off the device by press and holding the power button until LED lights turn off.

Note: For best use, we recommend charging up to three devices at a time.