View Product Page

This Quick Start Guide covers setup of the Satechi OntheGo™ Bluetooth Keyboard (ST-KOTGK ST-KOTGW): pairs over Bluetooth for wireless typing on the go and recharges over USB-C.

Setup steps

Step 1: Before use, please fully charge the OntheGo™ Keyboard via USB-C port using its included cable.

Step 2: Open the cover and use the adjustable kickstand to position your desired orientation.

Step 3: Turn on the keyboard by pressing the power button for 5 seconds on the top right of the keyboard. The LED above the power button will blink blue.

Step 4: Put the keyboard into pairing mode. Press and hold the FN key and one of the Bluetooth keys for 3-5 seconds. The LED will flash blue. You will be able to pair up to three devices.

Step 5: Turn on Bluetooth on your device and select “OntheGo Keyboard” from the list. Click “Connect” to finish the connection process.

Step 6: Press FN key and one of the Bluetooth keys (Q, W, E) to switch between Bluetooth channels (1, 2, or 3).

Step 7: After 30 minutes of inactivity, the keyboard will go into sleep mode to preserve battery. Press any key to wake and the keyboard will automatically connect.

Step 8: Turn off the keyboard by pressing the power button for 5 seconds on the top right of the keyboard. The LED above the power button with blink red.