View Product Page

This Quick Start Guide covers setup, features, and troubleshooting for the Satechi USB-C Multiport Pro Adapter V1 and V2.

Setup Steps

1. Connect the USB-C cable (included) to your laptop or tablet's USB-C port.

2. Connect your devices to the adapter's ports: HDMI for an external monitor (4K@30Hz on V1, 4K@60Hz on V2), USB-C Charge Port for pass-through charging, USB-A 3.0 Port for peripherals, and SD/Micro SD card slots for memory cards.

3. Note: Connected USB devices must not exceed 900mA total input. The SD and Micro SD card slots cannot be used at the same time.

User Manual - Multiport Pro(Apple).pdf