View Product Page

This Quick Start Guide covers setup of the Satechi Type-C 2-in-1 USB Hub with Ethernet (ST-TC2N1USB31AS ST-TC2N1USB31AM): a Type-C 2-in-1 USB hub with Gigabit Ethernet and three USB 3.0 ports.

Setup steps

Step 1: Plug Ethernet cable into a LAN port of your modem or router.

Step 2: Connect Ethernet cable to the RJ-45 port of the Hub.

Step 3: Connect the Hub to your Thunderbolt 3 or USB-C device.

Step 4: Connect up to three USB HDD/SSD/Thumbs or any USB devices to USB 3.0 ports of the Hub.