Setup Steps
1. Plug the hub into your device's Type-C USB port.
2. The LED on the hub turns on to confirm it is plugged in correctly.
3. Connect your devices to the hub's ports.
4. Plug a charging cable into the Type-C port to charge your MacBook.
5. To remove the hub, pull its top side gently in the direction opposite to the connector.
Download Quick Start Guide (PDF): Quick Guide - Type-C Passthrough Combo Hub.pdf
Getting Started with Your Type-C Pass-Through USB Hub
1. Remove the Type-C Pass-Through USB Hub from its packaging along with any included accessories.
2. Connect the USB-C connector to an available USB-C or Thunderbolt port on your computer. Ensure the port supports data transfer.
3. Your computer should automatically recognize the hub. No drivers or software installation required.
4. Connect your peripherals (USB drives, keyboards, mice, displays, SD cards) to the available ports on the hub.
5. If the hub has a USB-C Power Delivery passthrough port, connect your laptop charger to it to charge while using the hub.
6. Verify connected devices appear in System Information (Mac) or Device Manager (Windows).
Tips
For the best experience, use a high quality USB-C cable if one is not built in. Not all USB-C ports support video output; check your computer specifications if you plan to connect an external display. For more details, see the Technical Specifications and Device Compatibility articles for this product in our Help Center or visit satechi.com.
Comments
0 comments
Article is closed for comments.