View Product Page

This Quick Start Guide covers setup of the Satechi Aluminum Type-C Clamp Hub Pro (ST-TCIMHS / ST-TCIMHM): attaching the Clamp Hub Pro to your iMac's vents, connecting it to your iMac, and using the USB 3.0 ports and card readers.

Setup steps:

Step 1: Turn the knob until the clamps are hidden inside the case.

Step 2: Insert the Clamp Hub Pro in the air vents on the bottom side of your iMac.

Step 3: Turn the knob in opposite direction. Check that the Clamp Hub is securely fastened to your iMac.

Step 4: Plug The Clamp Hub USB-C cable into your iMac's Thunderbolt 3 port.

Step 5: Connect your devices to USB 3.0 ports and Micro/SD card reader slots.

Step 6: USB-C port can be used for data transfer only. Charging through USB-C port is not supported.

Compatibility: Type-C Clamp Hub Pro is designed exclusively for 2017 iMac models with USB-C ports, including 2017 iMac Pro, iMac Retina 4K and 27-inch 5K models.