View Product Page

This Quick Start Guide covers setup of the Satechi OntheGo™ Foldable Standhub (ST-GOTGFC): an OntheGo foldable stand hub with built-in ports.

Setup steps

Step 1: Connect the Stand Hub to Your Device • Connect the built-in USB-C host cable to your compatible USB-C device (iPad Pro, iPad Air, USB-C tablets, laptops, or smartphones). • The cable can be stored inside the stand when not in use.

Step 2: Power Your Device with 100W Pass-Through Charging • Connect a USB-C Power Delivery charger to the USB-C PD port. • Supports up to 100W max input for pass-through charging.

Step 3: Transfer Data with High-Speed USB Ports (10Gbps) • Connect accessories or storage devices to the USB-C or USB-A data ports (up to 10Gbps). • Supports external drives, keyboards, and other peripherals. • USB-C data ports do not support video output.

Step 4: Connect an External Display (4K HDMI Output) • Connect an external monitor or TV using the HDMI 2.0 port. • Supports up to 4K resolution at 60Hz.

Step 5: Access Photos & Files with UHS-II SD and microSD Readers • Insert SD or microSD cards into the built-in readers. • Supports SD 4.0 UHS-II and microSD 4.0 UHS-II (up to 312MB/s).

Step 6: Connect Audio Devices (3.5mm Combo Jack) • Plug in wired headphones or a microphone. • Supports audio input and output.

Step 7: Stabilize Your Setup • Non-slip base pads keep the stand stable. • Soft silicone grips hold your device securely. • Viewing angle is fixed (not adjustable).

Step 8: Simplified Storage • Store the host cable in the built-in compartment. • Fold the stand for compact storage.

Note: Warranty & Support Covered by Satechi’s 2-Year Limited Warranty