View Product Page

This User Manual covers setup, features, compatibility, and specifications for the Satechi OntheGo™ Foldable Standhub (ST-GOTGFC).

Product Overview

The OntheGo™ Foldable Standhub connects to your iPad through its USB-C host cable, which is stored in a cable compartment. It adds a 3.5mm audio jack (input and output supported), a USB-C PD port (100W input, 85W output), an HDMI port (4K/60Hz), a USB-A port and a USB-C port (each up to 10Gbps), and SD and microSD card readers (UHS-II, up to 312MB/s).

Setup

The OntheGo™ Foldable Standhub is plug and play.

1. Connect the USB-C cable to your iPad: Plug the USB-C host cable into your iPad.
2. Connect your devices: Plug your devices into the hub's ports.

Storing the host cable

1. Place the cable into the channel right after the alignment post.
2. Fit the USB-C connector into the cutout.
3. Press the cable into the channel all the way around.
4. Make sure it sits flat, then close the stand.

Functions

Parts labeled diagram of the OntheGo™ Foldable Standhub with 7 labeled components.

1. 3.5mm Audio Jack (Input/Output supported)
2. USB-C PD Port (100W Input) (85W Output)
3. HDMI Port (4K/60Hz): A direct HDMI to HDMI connection is required for video output.
4. USB-A Port (Up to 10Gbps)
5. USB-C Port (Up to 10Gbps): This USB-C data port does not support video output or output charging.
6. SD and microSD Card Readers (UHS-II) (Up to 312MB/s)
7. USB-C Host Cable (Stored in cable compartment): Connects the hub to your iPad. See Storing the host cable above to put it away.

Features

- 3.5mm audio jack with input and output supported
- USB-C PD port with 100W input and 85W output
- HDMI port up to 4K/60Hz
- USB-A and USB-C ports up to 10Gbps
- SD and microSD card readers, UHS-II, up to 312MB/s
- USB-C host cable that stores in the cable compartment

Important Limitations

Host devices must support Power Delivery and DP Alt Mode over USB-C: Your host device needs both for full functionality.

The USB-C data port does not support video output or output charging: This applies to port 5, the USB-C Port (Up to 10Gbps).

A direct HDMI to HDMI connection is required for video output.

Not compatible with the Apple USB SuperDrive or other CD readers.

Not compatible with thick tablet cases.

Connected USB devices should not exceed 5V / 900mA: The input current of connected USB devices should not exceed 5V / 900mA.

Specifications

Model: MN25STI04
Connector: USB-C host cable
Ports & Speeds:
3.5mm Audio Jack: input/output supported
USB-C PD Port: 100W input, 85W output
HDMI Port: 4K/60Hz
USB-A Port: up to 10Gbps
USB-C Port: up to 10Gbps
SD and microSD Card Readers: UHS-II, up to 312MB/s
USB-C Host Cable: stored in cable compartment

Certifications

FCC, CE, WEEE, CAN ICES(B)/NMB(B)