View Product Page

This User Manual covers all features, setup, specifications, and troubleshooting for the Satechi 2-in-1 Headphone Stand with Wireless Charger (ST-UCHSMCM).

What's In The Box

2-in-1 Headphone Stand with Wireless Charger, USB-C Cable, User Manual. (20W USB-C power adapter sold separately.)

Functions

1. USB-C Port (Input Only)
2. USB-C Port (Output Max. 5W)
3. Cable Management
4. Magnetic Wireless Charger (Max. 7.5W)
5. LED Indicator

Product Overview

The Satechi 2-in-1 Headphone Stand with Wireless Charger keeps your headphones stored upright while wirelessly charging a compatible iPhone or AirPods on its base. A USB-C output port is also available for charging a second device, and cable management routing keeps cords tidy along the column.

Setup

Assembly — The headphone stand ships in two pieces and requires brief assembly before use.

1. Insert the column into the base until it seats firmly.
2. Slide the headphone arm (T-bar) into the top of the column.
3. Use the included Allen key to tighten the screw at the joint where the arm meets the column. Tighten until the arm is secure and does not rotate freely.

Assembling the column, base, and headphone arm.

Power and Charging

1. Route the included USB-C cable through the cable management slot at the top of the arm and down the column.
2. Plug the USB-C cable into the input port (Port 1) on the base.
3. Connect the other end of the USB-C cable to a 20W USB-C power adapter (sold separately) and plug into a wall outlet.
4. The LED indicator will light up when the stand is powered.
5. Place your headphones on the T-bar arm.
6. Place a compatible iPhone or AirPods on the wireless charging pad on the base to begin wireless charging.

Connecting a USB-C cable to the input port. Use a 20W or higher power adapter for optimal charging performance.

Ports and Features

Labeled diagram of the 2-in-1 Headphone Stand with Wireless Charger with 5 labeled components.

1. USB-C Port (Input Only) — USB-C input port on the base. Connect the included USB-C cable here to power the stand. This port is for power input only — it does not charge devices.
2. USB-C Port (Output Max. 5W) — USB-C output port on the column. Use to charge a device (such as a phone or AirPods) at up to 5W. Requires the stand to be powered via Port 1.
3. Cable Management — Slot at the top of the headphone arm for routing the USB-C cable neatly along the stand.
4. Magnetic Wireless Charger (Max. 7.5W) — Wireless charging pad on the base. Place a compatible iPhone or AirPods face-up to charge wirelessly. Charges iPhone 12/13 at up to 7.5W and AirPods Max at up to 5W.
5. LED Indicator — Lights up at the base when the stand is connected to power and active.

Features

• Wireless charging pad supports iPhone 12/13 (up to 7.5W) and AirPods Max (up to 5W)
• Additional USB-C output port for charging a second device at up to 5W
• Built-in cable management for a clean setup
• Sturdy stand doubles as headphone storage

LED Indicators

• Lights up at the base when the stand is connected to power and active.

Important Limitations

• Use a minimum 20W USB-C power adapter for optimal charging performance. Lower-wattage adapters may result in reduced wireless charging speed.
• The USB-C input port (Port 1) is for power only — it does not charge connected devices. Use Port 2 (USB-C output) for device charging.
• Wireless charging speed depends on device compatibility: iPhone 12/13 charges at up to 7.5W wirelessly, AirPods Max at up to 5W. Other Qi-compatible devices may charge at lower speeds.
• Keep away from liquids and moisture.
• Do not expose to extreme heat or direct sunlight for extended periods.
• Do not drop or subject to strong impacts.
• Use only with a compatible 20W+ USB-C power adapter.

Specifications

Model: ST-UCHSMCM
Dimensions: 85 × 125 mm
Connector: USB-C input (cable included; 20W USB-C power adapter sold separately)

Wireless Charging Speeds:
iPhone 12 / 13 — up to 7.5W
AirPods Max — up to 5W

USB-C Output Port: Max 5W (for additional device charging)

Certifications

FCC, CE, WEEE