View Product Page

Instruction Manual — OntheGo™ Bluetooth Keyboard with Stand

This manual covers setup, pairing, charging, and features for the Satechi OntheGo™ Bluetooth Keyboard with Stand (Model: ST-KOTG | SKU: ST-KOTGK-EN / ST-KOTGW-EN).

📄 Download User Manual — OntheGo™ Bluetooth Keyboard · PDF · 3.8 MB

Parts Reference

Parts overview:

1. Power/Charging LED — Indicates power state and battery charge status.
2. Bluetooth LED — Indicates Bluetooth channel and pairing status.
3. USB-C Charging Port — Connect USB-C cable here to charge the keyboard.
4. On/Off Switch — Slide to power the keyboard on or off.
5. Function Keys — Press with Fn key to access media and system shortcuts.
6. Bluetooth Device Key — fn + Q/W/E to switch or pair Bluetooth channels.
7. Caps Lock LED Indicator — Lights up when Caps Lock is active.
8. Fn Key — Hold with other keys to access function key shortcuts.

Powering On / Off

To turn on the keyboard, press and hold the power button for 3 seconds; the power light will briefly turn off. To turn it off, press and hold the power button for 3 seconds again.

Pairing Your Devices

The OntheGo Keyboard supports up to 3 Bluetooth devices simultaneously via channels ✱1, ✱2, and ✱3.

1. Short press fn + Q, W, or E to select a Bluetooth channel. Long press fn + Q/W/E for 3 seconds to enter pairing mode.
2. Open the Bluetooth settings on your device.
3. Select "OnTheGo Keyboard" from the list of available devices.
4. Once connected, the pairing indicator light will turn off.

Note: After 30 minutes of inactivity, the keyboard will enter sleep mode. Press any key to wake it up.

Power Button LED Indicator

Powering On: Blue light stays on for 3 seconds, then turns off.
Powering Off: Red light stays on for 3 seconds, then turns off.
While Charging: Red light remains on.
Fully Charged: Blue light remains on.
Low Battery Warning: When battery drops below 20%, the red light flashes twice per second.

Bluetooth Channel LED Indicator

Switching Channels: The corresponding channel light flashes once when switching between channels ✱1, ✱2, and ✱3.
Pairing Mode: The blue light flashes once per second while in pairing mode. If no device connects within 180 seconds, the keyboard enters sleep mode.

Charging Your Keyboard

1. Connect the keyboard to a USB-C power source using the included USB-C to USB-C cable.
2. Charge for about 2.5 hours for a full battery. The keyboard can be used while charging, and a full charge lasts up to 2 months.

Note: When the battery reaches 0%, the keyboard will automatically shut down.

Function Key Guide

Hold the Fn key and press the corresponding key to activate the function listed below.

Key	iPadOS / iOS	Android	macOS
⬛ (Home)	Home	—	—
☀ Brightness Down	Decrease Brightness	Decrease Brightness	Decrease Display Brightness
☀ Brightness Up	Increase Brightness	Increase Brightness	Increase Display Brightness
⊞ App Switcher	App Switcher (iPad only)	—	App Switcher
🔍 Search	Spotlight Search	Search	Spotlight Search
📷 Screenshot	Screenshot	Screenshot	Screenshot
⏮ Previous Track	Last Track	Last Track	Previous Track
⏯ Play / Pause	Play / Pause	Play / Pause	Play / Pause
⏭ Next Track	Next Track	Next Track	Next Track
🔇 Mute	Mute	Mute	Mute
🔉 Volume Down	Volume Down	Volume Down	Volume Down
🔊 Volume Up	Volume Up	Volume Up	Volume Up
🔒 Lock Screen	Lock Screen	Lock Screen	Lock Screen
🌐 Language Switch	Language Switching (Fn combo)	Language Switching (Fn combo)	Language Switching (Fn combo)

Safety Instructions

Warning: Fire, electric shock, or damage to the keyboard could occur if the following instructions are not obeyed.

1. Keep away from microwave radiation sources.
2. Do not place heavy objects on this product.
3. Avoid dropping or bending the keyboard.
4. Keep away from oil, chemicals, or organic solvents.

Need Help?

Contact Satechi Support at support.satechi.com or email support@satechi.com.
Phone: +1 858 268 1800 | Website: www.satechi.com