To install an SSD in the USB-C Slim Dock for 24" iMac, unplug the dock, lift the back cover, insert the SSD at an angle, secure it with the silicone pin, and put the cover back on.

1. Unplug the USB-C Slim Dock for 24" iMac before installing or removing an SSD.
2. Lift the back cover off the dock.
3. Apply the included thermal pad to the bottom of the SSD. Make sure the pad is aligned.
4. Insert the SSD face up at a 45 degree angle.
5. Push down on the SSD and use the silicone pin to keep it in place.
6. Place the cover back on the dock. The cover attaches magnetically.
7. Connect the "HOST" port on the dock to one of your iMac's Thunderbolt ports with the included USB-C cable.

The USB-C Slim Dock for 24" iMac supports M.2 NVMe and SATA SSDs in 2242, 2260, and 2280 sizes, up to 2TB, at up to 10Gbps. SSDs with heat sinks are not compatible. The SSD is not included.