Not directly. Magnets do not grip the MacBook Neo aluminum body, so the magnetic base on the OntheGo 5-in-1 Multiport Adapter may not hold firmly on the laptop. Use one of the included 3M Adhesive Rings instead.

To attach a 3M Adhesive Ring:

1. Clean the surface where you will place the 3M Adhesive Ring.
2. Before peeling the adhesive, check that the USB-C cable comfortably reaches your MacBook Neo port. Adjust the placement if needed.
3. Remove the protective film from the 3M Adhesive Ring to expose the adhesive.
4. Press the 3M Adhesive Ring firmly onto a clean, flat surface. Avoid curved or textured areas.
5. Attach the OntheGo 5-in-1 Multiport Adapter to the ring and connect your devices.

The 3M Adhesive Ring is permanent, so plan the placement before applying the ring.

The magnetic base is a positioning feature and does not provide wireless charging.