SSD Installation - DotDisk™ 80Gbps SSD Enclosure | ST-EDD80C, ST-EDD80S
SSD Installation Guide: DotDisk™ 80Gbps SSD Enclosure
Before You Begin
- Ensure you have a compatible NVMe M.2 SSD (check supported form factors in Technical Specifications).
- Work on a clean, static-free surface.
- Handle the SSD by its edges to avoid static damage.
Installation Steps
-
Open the enclosure: Carefully remove the screw to remove the top cover as designed.
-
Locate the M.2 slot: Identify the M.2 connector inside the enclosure.
-
Insert the SSD: Align the SSD's connector with the M.2 slot. Insert at a 15 to 30 degree angle, then press down flat.
-
Secure the SSD: Use the included screw and thermal pad to secure the SSD in place.
-
Close the enclosure: Reassemble the enclosure, ensuring all parts are properly aligned. Secure the screw.
-
Connect and format: Connect to your computer via USB-C. Open Disk Utility (Mac) or Disk Management (Windows) to format the new drive.
Related Articles
Comments
0 comments
Article is closed for comments.